Amaran F22c 200W Flex LED

DP / Director of Photography

The F22c is the flex LED you reach for when the shot needs color — motivated by a neon sign, a TV screen, sunset gel effect — or when you need a completely even wash that wraps around a subject without a hot spot. The 2×2 foldable format means you can tape it inside a cabinet, fold it over a doorframe, or lay it flat on a table for an uplight. Full RGBWW gives you every HSI color, gel simulation, and white-light CCT in one fixture. Control it wirelessly via Sidus Link without touching the light.

Gaffer

The F22c draws 200W and runs on standard Edison or powerCON. Two units can share a single 20A circuit. It's one of the easiest lights in the kit to deploy — no head assembly, no mounting hardware beyond a standard C-stand clip or speed ring — just unfold it, hang it from the stand arm or frame, and power it on. The foldable panel is rigid enough to hold a shape and flexible enough to conform to irregular surfaces. Color-correct it for a specific feel using the gel simulation presets in Sidus Link, or dial in CCT from 2700K to 10000K.

Key Grip / Beginner

The F22c is one of the most beginner-friendly lights in the kit. No separate ballast. No complex head assembly. Unfold the panel, attach it to a C-stand arm via the included bracket, plug it in, and control it from the Sidus Link app. Watch the total draw on your circuit — 200W per panel is manageable, but two panels plus other lights can push a standard circuit close to its limit. Always sandbag your C-stand, especially with the wide panel catching ambient wind outdoors.