Grip — Heavy-Duty Combo Stand

Matthews High Walker / Hi-Roller

Triple-riser heavy-duty combo stand. Reaches 18 feet — the right tool for the Aputure 1200d, large overhead frames, and high-placement rigging on commercial sets.

Up to 18ftJunior ReceiverTriple RiserRubber FeetHeavy Load Rated
Matthews High Walker / Hi-Roller Combo Stand
Matthews High Walker / Hi-Roller Combo Stand in use on set

In the field

Specifications

SpecValue
TypeTriple-riser heavy-duty combo stand (Hi-Roller)
Max Height~18 feet / 5.5 meters
Pin Receiver5/8" junior receiver at top
Leg TypeRubber-tipped spider legs (3-leg base)
Max Load~50 lbs / 22.7 kg (center of gravity dependent)
Base Footprint~60" across (extended legs)
Riser Count3 risers (each ~4–5 ft)
Weight~20 lbs / 9 kg
Units Available2

From the Set

DP / Director of Photography

The High Walker is how you get the Aputure 1200d Pro or a 12×12 overhead frame up to a height where it actually does something on a larger set. At 18 feet it clears most location ceilings and puts a large light source high enough to simulate a window or skylight key without fighting parallax. Don't underestimate how much a high light placement changes the quality of shadows on your subject — it's the difference between flat overhead fill and a directional key that sculpts.

Gaffer

High Walkers need more sandbags than a standard C-stand — minimum 4× 25lb bags on the base legs, and more if you're running heavy fixtures or operating outdoors in any wind. The rubber-tipped legs don't spread as wide as a standard C-stand spider, so the stand is top-heavy at full extension. Never extend more risers than the load requires. When running the Aputure 1200d Pro, the separate ballast box stays on the ground and runs cable up to the head — this helps keep the head weight manageable on the High Walker. Check all riser locks before loading.

Key Grip / Beginner

The High Walker extends section by section. Extend from the bottom riser first — only extend higher sections when the lower one is locked. Always lock a riser section before loading weight on it. The rubber feet are the only thing keeping this stand in place on smooth floors — sandbag all three legs heavily before putting any fixture on top. Never stand under a loaded stand that's being moved. In any outdoor or semi-outdoor environment, this stand should be treated as wind-sensitive regardless of conditions — Florida weather can change fast.

Weather & Environment

⚠ Wind-Sensitive — Sandbag All Legs

High Walkers are significantly wind-sensitive at full extension. In outdoor Florida environments, treat them as high-risk in any conditions. Four or more 25-lb sandbags are required on the base legs for any loaded outdoor setup. Wind lines attached to nearby anchor points are strongly recommended for any setup over 12 feet.

Pairs Well With

$15/day

Add to Your Package

Check availability and build a custom quote for your shoot.

Request a Quote
View Full Packages